EBC Replacement Brake Discs
EBC manufacture many of its rotors. All rotors are machined and finished in the UK and in the USA.
The company adds value to its products by strictest quality controls and specifications and a 100% run out and dimensional check.
The brake rotors are made from G3000 spec cast iron. All EBC Premium Discs are cast to a material strength of 150 N/m2 with a tightly controlled surface hardness variation less than 20 HB and are precision CNC machined to a surface tolerance of less than 0.05 mm.
For this reason EBC recommends a maximum run out of fitted rotors of 0.1 mm or .004 inches (4 thousandths) TIR which means total indicator reading on a dial gauge. Run out figures above this will lead to vibration after 3000 to 4000 miles due to what we call disc thickness variation (wearing a thin spot on the high point of the rotor as it runs off-true) which is not a warranty condition.
These brake discs have the highest integrity and product quality on the aftermarket. An OE quality replacement disc, made of the finest grade iron and a perfect replacement disc for any car.
When replacing rotors it is essential to replace the brake pads. At any brake service the brake pads are as important as the new brake rotor and not replacing brakes with all new components could result in a safety issue.
