High Performance Forged Pistons & Steel Con Rod H Beam Set Abarth/Fiat/Alfa 1.4 16V Turbo
We supply the finest forged pistons available in Europe. Wössner is a leading European Factory based in Germany.
The crowns of the pistons are also mirror polished to better resist detonation on a high performance engine. Mirror polishing allows a more even spread of heat inside the chamber which will help prevent “hot spots” on piston crowns. Price includes all piston rings and gudgeon pins.
Specification
Engine typ I4 Turbo / 1.4 14v Turbo
OE Bore size 72mm
Bore sizes available 72mm/72.50mm/73mm
Engine CC 1368.02cc
Wössner Comp. ratio 9.8:1
OE Comp. ratio 9.8:1
Comp. height 26.8
Valve per Cylinder 4
Cylinders 4
Manufactured from forgings originally produced in Sweden, PEC connecting rods have offered engine builders and tuners a cost efficient and yet high performing solution to a wide variety engine building problems.
H-Beam and I-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength.
Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners with different specification bolts available depending on the level of performance required.
PEC Connecting rods have been designed, manufactured and tested to the highest levels of scrutiny before being released to the trade and the public.
Specification
Part NumberG0308
Engine TypeFiat 500 Abarth 1.4 16v Turbo, Alfa Giulietta/Mito 1.4 16 Turbo
Length C/C129.00mm
Small End Diameter18.00mm
Small End Width15.50mm (chamfered)
Big End Diameter45.13mm
Big End Width21.70mm
Bolt SpecificationARP2000 5/16 Thread
PEC rods are designed to withstand roughly 225hp per cylinder (typically 900hp on most 4cyl engines) and on the ARP 2000 series 3/8 bolts normally provided & have an 8,500 RPM safe operating limit (engine specific).
Delivery
Please contact us to check delivery time before ordering this product.
