Gazzella Racing Limited :: Abarth :: 500 / 595 / 695 Abarth (Typ 312) :: 1.4 T-Jet Abarth Essesse (160 HP) :: Engine and Air Filters :: Forged Performance Pistons and Rods :: High Performance Forged Pistons & Steel Con Rod H Beam Set (Abarth/Fiat 1.4 16V Turbo)

High Performance Forged Pistons & Steel Con Rod H Beam Set (Abarth/Fiat 1.4 16V Turbo)

High Performance Forged Pistons & Steel Con Rod H Beam Set (Abarth/Fiat 1.4 16V Turbo)

High Performance Forged Pistons & Steel Con Rod H Beam Set (Abarth/Fiat 1.4 16V Turbo)

High Performance Forged Pistons & Steel Con Rod H Beam Set (Abarth 1.4 16V Turbo)

We only supply the finest forged pistons available in Europe. Wössner are regarded by Europe’s leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress’s of competition life.

Wössner pistons feature a unique Moly coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances.

The crowns of the pistons are also mirror polished to better resist detonation on a high performance engine. Mirror polishing allows a more even spread of heat inside the chamber which will help prevent “hot spots” on piston crowns. Price includes all piston rings and gudgeon pins. Also available at other bore sizes. Please enquire.

Specification

Engine typ I4 Turbo / 1.4 14v Turbo
OE Bore size 72mm
Bore sizes available 72mm / 72.5mm / 73mm
Engine CC 1368.02cc / 1387.09cc / 1406.29cc
Wössner Comp. ratio 9.8:1
OE Comp. ratio 9.8:1
Comp. height 26.8
Valve per Cylinder 4
Cylinders 4

Manufactured from forgings originally produced in Sweden, PEC connecting rods have offered engine builders and tuners a cost efficient and yet high performing solution to a wide variety engine building problems.

H-Beam and I-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength.

Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners with different specification bolts available depending on the level of performance required.

PEC Connecting rods have been designed, manufactured and tested to the highest levels of scrutiny before being released to the trade and the public.

Specification

Part Number G0308
Engine Type Fiat 500 Abarth 1.4 16v Turbo
Length C/C 129.00mm
Small End Diameter 18.00mm
Small End Width 15.50mm (chamfered)
Big End Diameter 45.13mm
Big End Width 21.70mm
Bolt Specification ARP2000 5/16 Thread

PEC rods are designed to withstand roughly 225hp per cylinder (typically 900hp on most 4cyl engines) and on the ARP 2000 series 3/8 bolts normally provided & have an 8,500 RPM safe operating limit (engine specific).
Details
SKU 53752
Weight 2.00 kg
Manufacturer Code K9470-GO308
 
Online Price: £ 899.00
including VAT 20% ( £ 149.83 )
Options
Choose Piston Bore Size
Quantity

Send to friend

: *
: *
: *
 
 
Trusted SSL Certificate