Gazzella Racing Limited :: Lancia :: Delta I (Type 831AB0) :: 2.0 HF Integrale Evoluzione without Catalytic Converter (1992 -95) :: Engine and Air Filters :: Conrods :: Lancia Delta 2.0 16v/8v Turbo/Fiat 2.0 (1995cc) - H-Beam Forged Con Rod Set (4 Pieces included)

Lancia Delta 2.0 16v/8v Turbo/Fiat 2.0 (1995cc) - H-Beam Forged Con Rod Set (4 Pieces included)

Lancia Delta 2.0 16v/8v Turbo/Fiat 2.0 (1995cc) - H-Beam Forged Con Rod Set (4 Pieces included)

Lancia Delta 2.0 16v/8v Turbo/Fiat 2.0 (1995cc) - H-Beam Forged Con Rod Set (4 Pieces included)

Lancia 2.0 16v/8v Turbo/Fiat 2.0 (1995cc) - H-Beam Forged Con Rod Set (4 Pieces included)

Manufactured from forgings originally produced in Sweden, PEC connecting rods have offered engine builders and tuners a cost efficient and yet high performing solution to a wide variety engine building problems.

H-Beam and I-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength.

Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners with different specification bolts available depending on the level of performance required.

PEC Connecting rods have been designed, manufactured and tested to the highest levels of scrutiny before being released to the trade and the public alike and their success record speaks for itself.

Engine Type: 835 & 836

Bolts APR 2000

Centre 145mm

Specification

Part Number G0041
Engine Type Lancia Delta 2.0 8v & 16v Turbo
Length C/C 145.00mm
Small End Diameter 22.00mm
Small End Width 25.70mm
Big End Diameter 54.00mm
Big End Width 25.70mm

Bolt Specification

PEC rods are designed to withstand roughly 225hp per cylinder (typically 900hp on most 4cyl engines) and on the ARP 2000 series 3/8 bolts normally provided & have an 8,500 RPM safe operating limit (engine specific).

In some cases, we reccomend using the ARP custom age bolts available from us. This increases the hp threshold to 250hp per cylinder and raises the RPM limit to 9,000 however as every engine is different, these numbers are not guaranteed for every configuration.

Prolonged high RPM's for drifting, or sudden bursts of torque for drag racing (as two examples) will warrant the use of the custom age bolts to help retain the clamping force between the big end cap and the connecting rod.

If in doubt, please contact us for advice.

Delivery

Weight based on volumetric weight only - not actual weight.
Details
SKU 53697
Weight 3.00 kg
Manufacturer Code G0041
 
Online Price: 479.00
including VAT 20% ( 79.83 )
Options
Con Rod Bolt Options
Quantity

Send to friend

: *
: *
: *
 

Detailed images

 
Trusted SSL Certificate